B423 ASSEMBLY & INSTALLATION INSTRUCTIONS Shard Outdoor Sconce XL 302518 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B423 ASSEMBLY & INSTALLATION INSTRUCTIONS Shard Outdoor Sconce XL 302518 Component Parts A. Fixture Assembly B. Mounting Bracket C. #8 Screws (4) D. Rubber Washer (2) E. Ground Screw F. Cupped Washer G. Caulking Lip H. Plate Assembly I. Plate Screws (2) J. Glass K. Set Screw (2) MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B423 ASSEMBLY & INSTALLATION INSTRUCTIONS Shard Outdoor Sconce XL 302518 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
B423 ASSEMBLY & INSTALLATION INSTRUCTIONS Shard Outdoor Sconce XL 302518 D C E F MACHINE SCREWS B (Figure 2) A C G (Figure 3) MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B423 ASSEMBLY & INSTALLATION INSTRUCTIONS Shard Outdoor Sconce XL 302518 To Complete Install (Figures 4 & 5) 1. Carefully slide glass (J) into plate assembly (H). The side of the glass (J) with different colored pieces should be facing the set screws (K). Note: It may be necessary to back out set screws (K) before glass (J) can be dropped it. It is not necessary to completely remove set screws (K). 2.
