A591 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Semi Flush 128715 43614 1 OF 4
A591 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Semi Flush 128715 Component Parts A Fixture B Crossbar C Ground Screw D Threaded Stud (2) E Knob (2) F Socket (5) G Cup (5) H Bulb (not included) I Glass Sm (2) J Glass Lg (3) K Thumb Screws (15) 43614 2 OF 4
A591 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Semi Flush 128715 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A591 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Semi Flush 128715 To Install Glass (Figure 2) 1. Unpack glass (I & J). 2. Install bulbs (H) (not included) into sockets (F). 3. Place glass (J) over the bulb (H). 4. Slide glass (J) into cup (G) until groove in glass lines up with thumb screws (K). Note: Thumb screws are shipped in cups. It may be necessary to loosen thumb screws so glass can pass into cup. Screws will not need to be removed completely. 5. Tighten thumb screws (K) evenly to secure glass (J).
