Cut Sheet

USA Customer Service 800.624.4320 | Tech Support 414.247.5329 | fax [phone]
CANADA 905.564.5749 | fax [phone] | www.gardnerbender.com
181
Duct Seal Compound
Seals conduit openings against drafts, dust, moisture and noise.
• Protects terminal boxes, pot heads and bushings from corrosive elements.
• Deadens switch gear panel noise.
• Dough-like compound is easily “thumbed” over holes and gaps.
• Will not harden or form a skin under normal conditions.
• Not for use outdoors.
• Specifications:
- Viscosity: ASTM D-217 300-gram load - 7.0 -11.0; ASTM DS-S2
100-gram load - 9.0 -15.0
- Temperature Range: Adheres at -20 °F (-29 °C). Will not slump after
1 hr. at 350 °F (175 °C).
- Flash Point: Over 550 °F (285 °C).
- Other Properties: Non-conducting, non-deteriorating, non-toxic,
non-corrosive, non-staining, non-curable; 99% solid, coil-based.
Part # Pkg Qty Description
DS-110
10 pugs 1 lb Pugs
DS-130 30 pugs 1 lb Pugs
DS-510 2 pugs 5 lb Pugs
DS-530 6 pugs 5 lb Pugs
Galvanized Hanger Strap
For hanging or fastening conduit, pipe
or cables.
• Flexible for easy use.
Part # Pkg Qty Description
GHS-1510
1/card 10' x
3
⁄4" x 20 gauge
Saf-Te-Plate
™
Protectors
Protects cable and plastic pipe from nail punctures.
• Plate attaches to wood studs with a single
hammer blow.
• Required for compliance with NEC 1990
Article 300-4A.
Part # Pkg Qty Description
FP159-3
100/box 1
1
⁄2" x 3" x 16 gauge Metal Safety Plate
FP159-6 50/box 1
1
⁄2" x 6" x 16 gauge Metal Safety Plate
Wire Management Section 9/7/05 2:03 PM Page 181