Cut Sheet

www.hubbell.com
B07
EMT RAINTIGHT COMPRESSION CONNECTORS
Compression Connectors, Raintight Steel
N/A
Catalog #: 2913RT
Sub Class:
Trade Size:
Dimension A:
Dimension B:
Dimension C:
Package Type:
Std. Pkg.:
Ship Carton Qty.:
Product UPC-A Labeled:
Weight (Lbs. Per/C):
Ship Carton Length (in.):
Ship Carton Width (in.):
Ship Carton Height (in.):
Ctn Weight (Lbs.):
UPC Number:
I2of5:
APPLICATIONS
PRODUCT FEATURES
CULUS
For use in wet locations to bond and secure EMT conduit to a box or enclosure
RACO Raintight Steel EMT Compression fittings have been designed to comply with the new U.L. Raintight test requirements and to comply with the requirements of the 2008 NEC
358.42 and 314.15
All steel construction insures mechanical protection for the raceway
Fittings are available in 1/2 in. to 4 in. trade sizes
Zinc electroplate finish
All fittings are marked "Wet Locations" to allow inspecting authorities to immediately determine that the installation is up to code
All connectors are supplied with a factory installed knockout seal. No need to add the expense of buying a gasket separately.
No need to disassemble the fitting prior to installation. RACO Raintight Steel EMT Compression fittings are designed so that when they come out of the carton they can be installed
directly on the conduit. No need to waste time loosing compression nuts.
No need for special tools to install properly. Install these fittings like any other Steel EMT Compression fitting. No need for a torque wrench to insure proper installation.
N/A
Standard 514B, UL Listed E195970, C22.2 No. 18
GENERAL PRODUCT INFORMATION
Insulated
3/4 in.
DRAWING DIMENSIONS
1.79 in.
.45 in.
1.38 in.
PACKAGING
Carton
25
125
No
17.00
17.80
5.20
7.40
21.25
050169291399
50050169291394
Page 1 / 1