Cut Sheet

B8
bjq=cfqqfkdp
o^`l=`ljjbo`f^i=
cfqqfkdp
o^fkqfdeq=J=pqbbi=J=`ljmobppflk=`lrmifkdp
loabofkd=fkcloj^qflk=J=afjbkpflkp
Applications
• For use in wet locations to couple
two ends of EMT conduit
• RACO
®
Raintight Steel EMT Compres-
sion Fittings have been designed to
comply with the new U.L. Raintight
test requirements and to comply with
the requirements of the 2008 NEC
358.42 and 314.15
Product Features
• All steel construction insures me-
chanical protection for the raceway
• Fittings are available in 1/2” to 4”
trade sizes
• Zinc electroplate finish
• All fittings are marked “Wet Locations”.
Allows inspecting authorities to imme-
diately determine that the installation is
up to code
• No need to disassemble the fitting
prior to installation. RACO Raintight
Steel EMT Compression Fittings are
designed so that when they come
out of the carton they can be
installed directly on the conduit.
No need to waste time loosening
compression nuts
• No need for special tools to install
properly. Install these fittings like any
other Steel EMT Compression Fitting.
No need for a torque wrench to
insure proper installation
Compliances
• - Standard 514B
- C22.2 # 18
CATALOG TRADE UNIT SHIP UPC
NUMBER SIZE CTN. QTY. CTN. QTY. BAR CODE
2922RT 1/2” 50 250 —
2923RT 3/4” 25 125 —
2924RT 1” 15 75 —
2925RT 1-1/4” — 20 —
2926RT 1-1/2” — 10 —
2928RT 2” — 10 —
2950RT 2-1/2” — 1 —
2952RT 3” — 1 —
2954RT 3-1/2” — 1 —
2956RT 4” — 1 —
Couplings
Steel
CATALOG
NUMBER A B
2922RT 2.00 1.16
2923RT 2.15 1.38
2924RT 2.32 1.64
2925RT 2.50 2.04
2926RT 2.78 2.27
2928RT 2.88 2.74
2950RT 3.87 3.62
2952RT 4.00 4.25
2954RT 4.68 4.68
2956RT 4.93 5.18
DIMENSIONS
A
B
COMPRESSION FITTINGS - COUPLINGS
06 Pg B1 - B20 .qxp 6/9/2008 9:48 AM Page B8