Cut Sheet

Dimensions in Inches (mm)

Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484

Phone (800) 288-6000 • Fax (800) 255-1031 • Specifications subject to change without notice.

Kellems® Wire Management Products

Standard Duty Support Grips

Support Grips

Features

Offset eye

Strand equalizers position wires for equal loading throughout grip

length

Eye assemblies provide eye reinforcement at support hardware

Ordering Information

Description Cable Diameter

Range Inches(cm)

UPC Catalog Number

Offset Eye, Single

Weave, Closed Mesh

1.75"-1.99"

(4.44-5.05)

783585301402 02201044

Listings

CSA Certified

Specifications

Strand Tin-coated bronze

Eye Copper

Tag Mylar

Performance

Mechanical

Approximate Breaking

Strength

2,000 (8,896)

Working Load 200 (889.6) Lbs. (N)

Online Resources

Customer Use Drawing

eCatalog

Installation Instructions

Please review all SAFETY INFORMATION for grips on the following page.

PAGE 1
Kellems® Wire Management Products Standard Duty Support Grips Support Grips Features Offset eye Strand equalizers position wires for equal loading throughout grip length Eye assemblies provide eye reinforcement at support hardware Ordering Information Description Cable Diameter UPC Range Inches(cm) Catalog Number Offset Eye, Single Weave, Closed Mesh 1.75"-1.99" (4.44-5.
PAGE 2
Support Grip Safety Information Kellems Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping or horizontal position. Electrical cable must be supported, or its dead weight can cause excessive strain or pullout at the connections resulting in power failure. Support grips also absorb additional strain from flexure, vibration, expansion and contraction. Standard Support and Conduit Riser Grips are made of high grade, non-magnetic tin-coated bronze strands.