User's Guide

16
Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the button to access the menu.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, the
- (delete) / + (add) /
(view) / (scan) menu options will display.
3. Press the
+
UP button or
-
DOWN button to select + (add), and press
the
button to conrm.
4. Camera 1 / 2 / 3 / 4 will display. Press the
+
UP button or
-
DOWN
button to select the desired Camera, and press the
button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until
the Parent Unit nds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the button to access the menu.
2. Press the
<
LEFT button or
>
RIGHT button until
is highlighted, the
- (delete) / + (add) /
(view) / (scan) menu will display.
3. Press the
+
UP button or
-
DOWN button to select
(view), and
press the
button to conrm.
4. Camera 1 / 2 / 3 / 4 will display, press the
+
UP button or
-
DOWN
button to select the desired Camera, and press the
button to view the
picture from that camera.
Note:
Only camera locations with a * can be selected.
TIP
You can also press the button repeatedly to select the available camera
options from 1 / 2 / 3 / 4 ,
(scan).