User's Guide
Table Of Contents
- _bookmark2
- 1. Safety Instructions
- 2. Getting Started
- 3. Using the Baby Monitor
- 3.1 Power on or off the Parent Unit
- 3.2 Turn off the Parent Unit screen
- 3.3 Night Vision Mode
- 3.4 Talk Mode
- 3.5 Adjust the speaker volume for Parent Unit
- 3.6 Zoom
- 3.7 Set Night Light
- 3.8 Adjust the LCD brightness of the Parent Unit
- 3.9 Set the alarm on the Parent Unit
- 3.10 Temperature Setting
- 3.11 Set the screen off time of the Parent Unit
- 3.12 Pair and replace extra new Baby Unit
- 3.13 Delete a Baby Unit
- 3.14 Multi-Camera Use
- 4. Wi-Fi® Internet Viewing
- 5. Disposal of the Device (environment)
- 6. Cleaning
- 7. Help
- 8. General Information
- 9. Technical Specifications
11
Getting Started
English
2. Getting Started
2.1 Connecting the power supply for the Baby Unit
• Insert the DC plug of the
power adaptor into the DC
socket on the back of the
Baby Unit.
• Connect the other end of
the power adaptor to mains
power.
• The Green power indicator
lights when the baby unit is
on.
Note:
2.2 Connecting the Power Supply of the Parent Unit
The parent unit contains a rechargeable battery (Lithium ion 2100mAh). This
allows you to move the parent unit without losing the link and picture from the
Baby Unit. We recommend charging the parent unit for at least 16 hours
before irst use, and when the Parent Unit indicates the battery is low.
• Install the battery into the battery compartment according to the
polarity markings inside, slide the battery cover back as shown below.