User's Guide
Table Of Contents
- _bookmark2
- 1. Safety Instructions
- 2. Getting Started
- 3. Using the Baby Monitor
- 3.1 Power on or off the Parent Unit
- 3.2 Turn off the Parent Unit screen
- 3.3 Night Vision Mode
- 3.4 Talk Mode
- 3.5 Adjust the speaker volume for Parent Unit
- 3.6 Zoom
- 3.7 Set Night Light
- 3.8 Adjust the LCD brightness of the Parent Unit
- 3.9 Set the alarm on the Parent Unit
- 3.10 Temperature Setting
- 3.11 Set the screen off time of the Parent Unit
- 3.12 Pair and replace extra new Baby Unit
- 3.13 Delete a Baby Unit
- 3.14 Multi-Camera Use
- 4. Wi-Fi® Internet Viewing
- 5. Disposal of the Device (environment)
- 6. Cleaning
- 7. Help
- 8. General Information
- 9. Technical Specifications
22
Wi-Fi® Internet Viewing
• The following setup instructions will appear on the screen, select your
Wi-Fi network and enter “Password” (fig.11).
• Power on your camera and wait for the LED to flash Red on the camera.
Press and hold the PAIR button on the side of Camera, you will hear a
voice prompt “Ready for Pairing” then tap Next (fig.12, fig.13)
g.11 g.12 g.13
• Tap Generate QR code on your device and hold the QR code 15 to 30cm
in front of Camera until you hear confirmation message “Scanning Success”
from your device. (fig.14, fig.15)
g.14 g.15