User's Guide
Table Of Contents
- _bookmark2
- 1. Safety Instructions
- 2. Getting Started
- 3. Using the Baby Monitor
- 3.1 Power on or off the Parent Unit
- 3.2 Turn off the Parent Unit screen
- 3.3 Night Vision Mode
- 3.4 Talk Mode
- 3.5 Adjust the speaker volume for Parent Unit
- 3.6 Zoom
- 3.7 Set Night Light
- 3.8 Adjust the LCD brightness of the Parent Unit
- 3.9 Set the alarm on the Parent Unit
- 3.10 Temperature Setting
- 3.11 Set the screen off time of the Parent Unit
- 3.12 Pair and replace extra new Baby Unit
- 3.13 Delete a Baby Unit
- 3.14 Multi-Camera Use
- 4. Wi-Fi® Internet Viewing
- 5. Disposal of the Device (environment)
- 6. Cleaning
- 7. Help
- 8. General Information
- 9. Technical Specifications
23
Wi-Fi® Internet Viewing
English
• Tap Continue, it will take a few minutes for the Camera to connect to the
Wi-Fi® network before showing the connection status (fig.16).
• The Camera has been successfully connected, name your Camera (fig.17).
• Tap Finish to complete the camera setup with Hubble.
g.16 g.17
Note: If connection fails, please tap Retry and repeat the steps starting from
4.4.4.
• Add your baby’s profile to track your baby growth by tapping Create
New Profile (fig.18).
• Enter your baby information and tap Done to create profile (fig.19).
• Select one of the profiles for your baby when using the Camera (fig. 20).
g.18 g.19 g.20