User's Guide

Table Of Contents

Using the Baby Monitor

3.1

Setting Up

Place the Baby Unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor. Adjust the angle of the Baby

Unit's camera until you are satisfied with the image shown on the Parent Unit.

Note:

Do not place the Baby Unit within the baby’s reach! If there is interference

with the picture or sound, try moving the units to different locations, and

ensure they are not close to other electrical equipment.

3.2

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images

in the dark. When the built-in Light sensor on the top of the Unit detects

a low level of ambient light, the LEDs will automatically activate and the

screen on the Parent Unit will display in black and white. The

icon will be

displayed at the top of the screen.

3.3

Talk Mode

Press and hold the TALK button T on the Parent Unit to talk to your baby

through the Baby Unit’s speaker.

The T icon will be displayed at the top of the LCD screen.

3.4 Video ON/OFF

Press Display On/Off button to turn the LCD screen on or off. Audio will

remain active.

3.5

Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the

Baby Unit will be displayed at the top of the LCD screen. The readings will

turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F.

The reading will change to HH °C / °F if the temperature goes above 36°C /

97°F. The reading will change to LL °C / °F if the temperature goes below 1°C

/ 34°F.