User's Guide

16
Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the + UP button or - DOWN button to select + (add), and press
the button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or - DOWN
button to select the desired Camera, and press the button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * beside it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until
the Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the + UP button or - DOWN button to select (view), and
press the button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the button to view the
picture from that camera.
Note:
Only camera locations with a * can be selected.
TIP
You can also press the button repeatedly to select the avail-able camera
options from 1 / 2 / 3 / 4 , (scan) .