User's Guide

16
Using the Baby Monitor
3.8 Camera Control
3.8.1 Add (pair) a camera
1. Tap the in the menu bar.
2. Tap
, / / / will appear.
3. Tap
/ / / to select the desired Camera location.
Note: If a camera is currently paired with the Parent Unit, its camera
location (in dark grey colour) cannot be selected for a new registration.
4. Press and hold the PAIR button on the underside of the Baby Unit until
the Parent Unit nds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
3.8.2 View a camera
1. Tap the in the menu bar.
2. Tap
, / / / will appear.
3. Tap
/ / / to select the desired Camera.
3.8.3 Delete a camera
1. Tap the in the menu bar.
2. Tap
, / / / will appear.
3. Tap
/ / / to select the desired Camera and tap Press to
delete button to delete that registration.
Note:
You cannot delete the camera if there is only one registered camera in
the Parent Unit.
3.8.4 Scan cameras
This function is only available when you have more than 1 Baby Unit
(Camera).
1. Tap the
in the menu bar.
2. Tap
, / / / will appear.
3. The parent unit will scan between registered cameras stopping briey
on each registered camera for approx. 12 seconds.