Datasheet

Features

Broadband•

Benefits

High repeatability•

DC blocks

DC Blocks act as a high-pass filter by blocking the DC current on the RF line. The main function is to protect devices

which cannot withstand any additional DC current from the remainder of the RF line.

Frequency

(GHz) Interface

Voltage

max. (V) Block type H+S type Item no.

18 SMA 50 inner 1100.19.A 22645271

5 N 250 inner 1100.17.A 22550232

4 BNC 250 inner 1100.01.A 22550233

5 TNC 250 inner 1100.26.A 23001075

DC blocks

Features

Interface according MIL standard•

Benefits

High repeatability•

Very low return loss•

Impedance matching pads

Matchingpadsconnecttwosystemswithdifferentimpedancesvalues(50and75Ω)withminimalreflection.

Interface

Frequency

(GHz)

VSWR at

50 Ω

Power max.

(W) H+S type Item no.

BNC50(m) – 75(f) 1 1.1 1 6001.01.A 22543737

BNC50(f)-75(m) 1 1.1 1 6001.01.B 22550085

N50(f)-75(m) 1 1.1 1 6001.17.B 22642806

N50(m)-75(f) 1 1.1 1 6001.17.A 22642807

N50(m)-BNC75(f) 1 1.1 1 6001.00.0001 22649583

N50(f)-BNC75(m) 1 1.1 1 6001.00.0002 22651259

Impedance matching pads

HUBER+SUHNER

PAGE 1
DC blocks DC Blocks act as a high-pass filter by blocking the DC current on the RF line. The main function is to protect devices which cannot withstand any additional DC current from the remainder of the RF line. Features Benefits • Broadband • High repeatability DC blocks Frequency (GHz) Interface Voltage max. (V) Block type H+S type Item no. 18 SMA 50 inner 1100.19.A 22645271 5 N 250 inner 1100.17.A 22550232 4 BNC 250 inner 1100.01.A 22550233 5 TNC 250 inner 1100.26.
PAGE 2
Resistive power dividers These dividers are used to equally split an input signal into two 6 dB output channels. (Not suitable for use as a combiner!) Features Benefits • Broadband • Low isolation • Very good return loss • Cost effective solution to tap off a signal • without using an expensive broadband coupler. Resistive power divider Interface Frequency (GHz) VSWR Power max. (W) H+S type Item no. BNC (fff) 2 1 4901.01.A 22550077 1.15 BNC (mff) 2 1.15 1 4901.01.
PAGE 3
Coupler Couplers are used in almost every field of the Test+Measurement and telecommunication markets, primarily to combine multi-band wireless antennas. They can be used to tap off one part of the input signal as either a combiner or divider. Features Benefits • Broadband • Low loss • Good directivity and VSWR Directional coupler Interface Coupling value (dB) Frequency (GHz) VSWR H+S type Item no. N 5 2.5 1.25 7205_N-50-1 84057612 N 6 2.5 1.25 7206_N-50-1 84057613 N 7 2.5 1.