Product Brochure

ULTIMATE VERSATILITY FOR
SEALING EVERY ROUGH OPENING.
ZIP System
™
liquid flash is a liquid-applied flashing membrane made of STPE
(silyl-terminated-polyether) technology. This high-performance formulation combines
the durability of silicones with the toughness of urethanes.
ENGINEERED FOR SEALING IRREGULAR,
CURVED OR HARD TO FLASH AREAS.
1
2
3
4
WEATHER AND UV RESISTANT
Warranted for up to 180 days of extreme weather and UV exposure*
3
OPTIMAL VISCOSITY
Flows easily to seal irregular shapes and surfaces
1
QUICK CURE TIME
Immediately weather resistant and tack free in as little as 20–40 minutes
depending on conditions. Target thickness achieved when substrate is
no longer visible
2
PROPER ADHESION TO A WIDE RANGE OF SURFACES
Bonds to wood, concrete, masonry, architectural metals, glass, PVC,
FRP, EPDM and most other building materials
4
Flows easily to seal
difficult areas, such
as rough openings
and wall penetrations.
FORMS AN INSTANT SEAL, UNDER THE MOST DEMANDING CONDITIONS.
Bonds and cures in
wet weather and on
damp substrates.
Becomes waterproof
immediately after
installation, providing
fast rough dry-in.
* Limitations and restrictions apply. Visit ZIPsystem.com for details.
** At 70°F and 50% relative humidity. Low temperatures and low relative humidity slow dry time; high temperatures and high relative humidity accelerate dry time.
ZIP System
™
liquid flash
Packaging Options
Typical Coverage:
Window Sill Flashing
(2x4 Framing)
Cured
Thickness
Compound
Technology
Water and Air
Penetration
Installation
Temperature
Range
Allowable
UV
Exposure
Tack Free Time Cure Time
20 oz. Sausage Pack
20 If (approx. six 3'0"
window sills)
29 If (approx. nine 3'0"
window sills)
12 mils
STPE
Polymer
ASTM E331:
Pass
ASTM E2357:
Pass
35°–110°F 180 Days* 20-40 Minutes**
12 mils =
4 Hours**
29 oz. Cartridge
14