User's Guide

13
Configuring network settings to the tablets for the first time
1. When taking the tablets into use for the first time, take the tablets out of the box and turn them on
by pressing the power button on the right side of the tablet. Hublet admin app will open.
2. Click Setup > Continue and the tablet will ask you to scan the QR code that you
created in the Hublet Manager with your laptop (see instructions below)
3. Find the desired network from the list in Hublet Manager under Networks.
Taking into use: Configuring allowed networks for the tablets 2/4
> >
Tablet after first boot
Tablet: Setup > Continue
Tablet: Setup > Continue > QR Scanner
13/03/2019