User's Manual

Table Of Contents

4.2.4. RUDD REVERSE SET UP

Hold down ENT key for 1 second to enter setting status.Press ENT key to enter

reverse setting status.Move arrow to Rudder by up/down key ,Press ENT key to

choose reverse and then hold EXT key for 2 seconds to confirm and exit.

4.2.5. EXPERT MODE REVERSE SET UP

Hold down ENT key for 1 second to enter setting status.Press ENT key to enter

reverse setting status.Move arrow to Exper mode by up/down key ,Press ENT key to

choose reverse and then hold EXT key for 2 seconds to confirm and exit.

4.2.6 Plane/Helicopter MODE REVERSE SET UP

Hold down ENT key for 1 second to enter setting status.Press ENT key to enter

reverse setting status.Move arrow to Plane type or Helicopter type by up/down key

,Press ENT key to choose reverse and then hold EXT key for 2 seconds to confirm

and exit.

6.2 Effect of Control

CAUTION: To avoid loss of control: ALWAYS move the controls S-L-O-W-L-Y! Be

aware that control inputs will reduce available lift (see ‘Helicopter Principles of

Flight’).Be ready to use a little extra Throttle to maintain height during maneuvers.

Throttle (Collective Power) increases/decreases the Flying Height of your helicopter

Rudder (Collective Torque Yaw) rotates your helicopter’s fuselage Left / Right

Elevator (Cyclic Pitch) moves your helicopter Forwards/Backwards

Aileron (Cyclic Roll) moves your helicopter ‘sideways’ Left/Right

MODE 2

MODE 1

5805 HUBSAN 7.7V

Set reverse X

Set sensitive X

Plane type Helicopter

Expert mode Yes

Stick mode Mode 2

5805 HUBSAN 7.7V

Set reverse X

Set sensitive X

Plane type Helicopter

Expert mode Yes

Stick mode Mode 2

5805 HUBSAN 7.7V

Set reverse -

Elevator Normal

Aileron Reverse

Throttle Normal

Rudder Normal

Set sensitive X

Plane type Helicopter

Expert mode No

Stick mode Mode 2