Disclaimer & Warning All users must read product operating instructions as well as this liability disclaimer before using any Hubs an product: By using a Hubs an product(s), users are accepting the terms and conditions of Hubs an liability and operational guidelines. This product is not suitable for minors under 14 years of age.
IMPORTANT SAFETY INFORMATION OPERATION Be extremely careful and responsible when using the aircraft. Small electronic components can be damaged dus 1o dashes oF exposure to moisture / liquid. To avid any injuries, do not Use the aircraft w With broken of damaged components. MAINTENANCE Do not try 1o open or repair the units by yourself. Please contact Hubs an or Hubs an authorized dealers for service. For more information, please visit the official website at www hubsan.
IMPORTANT SAFETY INFORMATION Hubs an Safety Advisory Notice for Lithium-Polymer (LIP) Batteries Li Po batteries are different from conventional batteries in that their chemical contents are encased in a relatively lightweight foll packaging. This has the advantage of significantly reducing their weight b But it does make them moire susceptible to damage if roughly or inappropriately handled.
Table Of Contents Important Safety Information 1 Symbol Explanation 1 Usage Advice 1 1. The Aircraft 4 1.1 Aircraft Component Breakdown Charging and Installing the Aircraft Battery o R 1.3 Installing & Uninstalling the Aircraft Propeller 1.4 Aircraft LED Indications 5 2. X-Hubs an APP 6 2.1 App Overview = 6 2.2 Downloading the X-Hubs an App -nnv 6 2.3 Main Interface Guide & 3. The HTO16B Transmitter — / 3.1 HTO16B Function Breakdown Flight 4.1 Pr-Flight Checklist 4.2 Pairing The Mobile Device 9 4.
AV iR 1.1 Aircraft Component Breakdown 1. Propeller A 2. Propeller B 3. LED indict or 4. Motor 5. Body shell 6. 7. Micro-SD / TF Slo 8. Gimbals 9 1 i}‘ Gimbals Protection Guard 4K HD Camera Power 10 1.2 Charging and Installing the Aircraft Battery Charging: Take out the aircraft battery and connect it to the balance charger and adapter. Wall Adapter — Balance Charger | : Aircraft Battery g While charging, the balance charger LED will be solid red. When charging is complete, the LED will be solid green.
1.3 Installing & Uninstalling the Aircraft Propeller Before installing propellers for the first time, please check that each Propeller A is matched with motor A and each Propeller B is matched with motor B. Then use the provided screws to secure each propeller. Tighten the screws clockwise to install them. When the propellers need to be replaced, unscrew the propellers by loosening the screws counterclockwise and then removing the damaged propellers. 1.
2 X-Hubs an App 2.1 APP overview X-Hubs an is a flight control APP designed for HUBS AN WIFI-enabled aircraft. Users can control the flight, camera, video and flight parameters with the APP. It is recommended to use a smart device with a large screen for the optimal visual experience. 2.2 Downloading the X-Hubs an App Before flying, users must download the X-Hubs an APP, Download the APP for free by scanning the code on the right or by downloading it via the App Store (i0S) and Google Play (Android). 2.
3 The HT016B Transmitter 3.1 HT016B Function Breakdown {1). Throttle / Aileron stick (2). Elevator / Rudder stick 1. Throttle / Rudder Joystick 2. Elevator / Aileron Joystick 3. Return To Home (Aircraft Returns To Takeoff Point) Power {Long press) Auto Takeoff / Land Expert / Normal Mode Power Status LED . Photo 9. Video 10. Gimbals Adjustment Wheel 11. Charging / Adapter Port 12. WIFI Antenna " T 13.
3.3 HT016B Function Breakdown |S/N| Key / Switch Function Pushily the stickjlflamarddor and the iy quadruple will ascend or descend respectively) L / Rudder gash thg stick left or right and the qua copter ) will fly left or right {respectively). Pustular the or gackv\gard : adopter wi wards or backwards {2y sl irrespective. Push the stick left or right and the quad copter will rotate counterclockwise or clockwise (respectively).
TR We recommend that users implement some kind of flight training (i.e using a simulator for flight practice, seeking professional guidance, etc.) before flying the aircraft. Please select an appropriate flight environment for flight. 4.1 Pr-Flight Checklist {1)The aircraft and transmitter batteries are fully charged. {2) Whether the propellers are installed correctly. (3) Insert a Micro-SD card for saving photos and videos. {4) Whether the motors start normally. {5) Make sure the camera lens is clean. 4.
{ 3 ) Run X-Hubs an App, In the main settings at the top right corner, select Control settings then choose WIFI and "Set up transmitter connection to aircraft” to set up the connection between aircraft and the transmitter. Transmitter model @ Transmitter connection 0 Bluetooth @ WEAL 5 Transmitter hardware version Lot un transmitter conception Lo accrual Transmitting firmware version Refresh the WIFI list to search for the WIFI name of your product Tap on "Connect".
4.3 Calibration 4.3.1 Horizontal Calibration If during takeoff or flight the aircraft drifts, lifts off unevenly, perform a horizontal calibration. First, land the aircraft if it is flying and make sure all motors come to a complete stop. The aircraft must also be on a completely flat and horizontal surface for the calibration to work properly. Tap the Settings cog, followed by "Other®. Select "Horizontal Calibration® and allow the aircraft to calibrate itself.
4.4 Flying with the APP 4.4.1 Auto Takeoff / Land When the LED indicators are solid on the aircraft, pilots can use auto takeoff / land function. Please follow the steps below for auto takeoff / land: Auto Takeoff As shown in Figure 1, make sure the surrounding environment is safe for take off then tap on the "Auto Takeoff” button and the aircraft will take off and hover at 2 meters in altitude.
2) Way points In the APP settings, go to "Aircraft” "Way point Parameter” to set the way point parameters. Aircraft < Way point Parameter Dig fault Way point Altitude E i 3 Maximum Way point Altitude 500 Maximum Way point Length 1aao Mastermind Wayfaring Badinage 100 : i ; Default Way point Hover Time Maxima Viewpoint Hover Time 30 ! Tap on "Mode Selection” and select "Way point Mode”.
3) Orbit mode Tap on "Mode Selection” then "Orbit Mode” to set the current location or the position of the mobile device as the center. During Orbit mode, you can adjust the speed and direction by moving the control stick left and right and adjust the orbit radius by moving the control stick forward and backward.
5 ¥ Creative Video Tap on "Mode Selection® then "Creative Video adn select "Panorama”. Set the direction, angle and speed of the aircraft rotation. Once the setup is complete, the aircraft will perform panorama recording and save the recording. D | Disconnectedness =0 yowl SRR ERRS S8 mermen Line Fly Mode Tap on "Mode Selection” then "Line Fly Mode’. Set the angle, distance and speed of the aircraft. Once setup is complete, the aircraft will execute Line Fly mode.
4.5 Flying with the HT016B Transmitter When your aircraft is connect to the mobile device and the transmitter, you can control the aircraft with the transmitter. How to arm the motors: Simultaneously pull the joysticks diagonally down-out to arm the motors (as shown in the below figure). How to disarm the motors: Disarm the motors by simultaneously pulling both sticks diagonally down-out. When the motors have completely stopped, release the joysticks. o e Motor Arming Condition: 1.
Auto Takeoff / Land When the aircraft LED indicators stay solid, pilots can use auto takeoff / land. Please follow the instructions below for auto takeoff / land: Auto Takeout Make sure the surrounding environment is safe for takeoff. Long press the auto takeoff button and the aircraft will take off automatically and hover at the 2 meters in altitude. Auto Land Make sure the surrounding environment is safe for landing.
The remote control is by default set to Mode 2 in factory; this mania | will introduce flight operations in Mode 2. « Transmitter joysticks are self centering and spring loaded: the Fiddlesticks automatically center themselves « Joystick sensitivity: dependent how much and how forcefully each joystick is pulled or pushed away from center point. Remote Control Aircraft (Mode 2) Transmitter controls The throttle is used to control the ascent and descent of the aircraft.
Remote Control (Mode 2) Aircraft Backward Transmitter controls The elevator controls the aircraft” s forward and backward movement. Push the Joystick forward and the aircraft will tilt and fly forward. Pull the Joystick back and the aircraft will tilt and fly backwards When the Joystick is centered (unloving, the aircraft will hold its altitude in the air. How hard the elevator is:pushed will determine the degree of the aircraft’ s tilt and therefore the velocity of its forward and backward movement.
LR TR 5.1 Low Power Fail safe When the aircraft battery is low, there is likely insufficient power to support the return of the aircraft. Please land the aircraft immediately, otherwise the aircraft will fall and cause damage to the aircraft and surrounding objects. To prevent this, the aircraft flight control will use flight information to determine whether to perform a Return to Home or to land immediately. 5.
Frequently Asked Questions 1. Aircraft and remote control are not pairing (@ Check that the mobile device WIF utility is active. @ Restart the aircraft. 2. Weak or nonexistent GPS signal / few or no GPS satellites Make sure that the aircraft is not indoors or between buildings. Please take the aircraft outdoors to receive GPS satellites / signal. 3. The aircraft does not return to the home point When the aircraft takes off be sure that the aircraft has received 6 or more satellites. 4.
Limitation of Liability Hubs an accepts no liability for damages, injuries or any legal responsibilities incurred directly or indirectly from the use of Hubs an products under the following conditions: 1. Damages, injuries or any legal responsibilities incurred when users are drunk, under the influence of drugs or anesthesia, dizzy, fatigued, nauseous and / or affected by other conditions both physical and mental that could impair sound judgment and / or personal ability. 2.
13. Misuse and / or alteration of batteries, product / aircraft circuits, hardware protections (including protection circuits), RC model and battery chargers. malfunction of equipment or accessory, including memory cards, that results in the failure of an image or video to-be recorded or ot be recorded in a way that is machine readable. 15. Users who engage in reckless, unsafe flying (with or without sufficient training). 16. Non compliance with pre cautions, | instructions, i formation an d.
MISINFORMATION This-equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules: These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses; and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Please read the operating instructions carefully before use! ® Never leave units unattended when charging & Unplug the charging cable immediately after charging LRl APP Flight o This product is not a toy Ll & Not suitable for children under 14 years of age Product name: X4 AIR PRO Product Standard Numberless 001-2017 Vendor: Sheen Hubs an Technology Co., Ltd Address: 13th Floor, Block €, Sheen Software Industrial Base, Etude Road, Anshan District Sheen; Guangdong Province, China Email: WWW. HUBSAN.
