User manual

ManualsBrandsHUBSAN ManualsDronesX4 Brushless FPV Quadcopter RtF First Person View, Camera drone

Declaration of Conformity (DOC)

The manufacturer hereby declares that this product conforms to the 2014/53/EU directive.

Click on the following link to read the full text of the EU declaration of conformity:

www.conrad.com/downloads

Select a language by clicking on a ag symbol and enter the product order number

in the search box. You can then download the EU declaration of conformity in PDF

format.

Disposal

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste. At the end of its service life, dispose of the product according to

the relevant statutory regulations.

Remove any inserted (rechargeable) batteries and dispose of them separately from

the product.

b) (Rechargeable) batteries

You as the end user are required by law (Battery Ordinance) to return all used

batteries/rechargeable batteries. Disposing of them in the household waste is

prohibited.

Contaminated (rechargeable) batteries are labelled with this symbol to indicate that

disposal in the domestic waste is forbidden. The designations for the heavy metals

involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)

batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our

stores or wherever (rechargeable) batteries are sold.

You thus full your statutory obligations and contribute to the protection of the environment.

Safety-relevant technical data

Transmission frequency................ 2.410 - 2.465 GHz

Transmitter range ......................... 300 m

Transmission output ..................... 5 dbm

Hubsan GPS-Drohne FPV RTF

Item no. 1545012

Intended use

This product is solely designed for private use in the eld of model making and the operating

times associated with it. This system is not suitable for industrial use.

This product is an electrically powered helicopter-like model with wireless radio control via the

remote control system included in the delivery.

The product is designed for operation indoor but may also be used outdoors at totally calm

conditions.

The product must not become damp or wet.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use

the product for purposes other than those described above, the product may be damaged.

In addition, improper use can cause hazards such as short circuiting, re, electric shock etc.

Read these important notes and the operating instructions of your product carefully and keep

them. Make this product available to third parties only together with these important notes and

its operating instructions.

This product complies with the statutory national and European requirements. All company

You are solely responsible for the safe operation of the product.

This product is not a toy and not suitable for children under 14 years of age.

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or

scan the QR code shown. Follow the instructions on the website.

Safety instructions

a) Li-Po batteries

• The rechargeable battery may be permanently built into the product and in such case cannot

be replaced.

• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery

might cause an explosion or a re! Unlike conventional batteries/rechargeable batteries (e.g.

AA or AAA type), the casing of the LiPo rechargeable battery does not consist of a thin sheet

but rather a sensitive plastic lm only.

• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the

product into re. There is a danger of re and explosion!

• Charge the rechargeable battery regularly, even if you do are not using the product. Due

to the rechargeable battery technology being used, you do not need to discharge the

rechargeable battery rst.

• Never charge the rechargeable battery of the product unattended.

• When charging, place the product on a surface that is not heat-sensitive. It is normal that a

certain amount of heat is generated during charging.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.