User's Manual

During the flight, when the aircraft has a significant horizontal deviation, please
land the drone, lock the motor, and place it on the horizontal ground. Then enter
the APP setting interface, select horizontal calibration, the aircraft will automatically
perform the calibration, the four heading lights will flash, and it will stay on after
the calibration is completed. Do not move the aircraft during calibration.
3.4 Aircraft Calibration
3.4.1 Horizontal Calibration
When using for the first time, the compass calibration will pop out before takeoff.
Follow the instructions on your screen, rotate the aircraft horizontally the n point
the aircraft nose down and rotate it c lockwise. The compass calibration message
will disappear once it is complet ed. You must complete the compass calibration
before flying the aircraft for the first time.
The compass is susceptible to interference by electronic equipments,magnetic
interference and metals and interference could lead to erratic behavior and loss of
control. Regular calibration helps to keep the compass and its readings accurate. In
the "Settings", select "Compass Calibration" under "Calibration".
3.4.2 Compass Calibration
Aircraft
Waypoint parameters
Aircraft model Parameter unit
Metric Unit (m/s)
Device binding
Calibration
Compass calibration
Horizontal Calibration
Start binding
The aircraft is bound to the current mobile device, and on
longer establish a binding with other devices.
13