User's Manual

Motor starting condition

(1) The aircraft, remote control, and mobile phone have been connected

successfully ;

(2) The aircraft compass has been calibrated (APP doesn't prompt to calibrate

the compass) ;

(3) The aircraft must be placed on a horizontally leveled ground ;

(4) Aircraft has not locked sufficient GPS satellites for positioning. please

don't force take-off ;

(5) The power of the drone should be ≥15% ;

3.5 Starting/Stopping the Motors

Starting the Motors

Push both stick down and outwards as shown in picture to start the motors.

Once the motors start spinning, Release both sticks.

Stopping the Motors

When the motors are running, Push both stick down and outwards again to

stop the motors. Release both sticks once motors stop.

Forced Motor Stop

When flying in the air, the motors can be forced to stop in 2 seconds by push

both sticks down and outwards. Use this function with caution, as it can cause

the aircraft to fall and may endanger personal safety.

45.87 7503 , -106.12 3984

45.877503 , -106.123984，65m

Pi tch 35 °

Yaw 25 °

Ro ll 45°

SPEED 0.0M/S

H: 0.0m

D: 0 .0m

Connected