User Manual

Rev 1.1 1/17
In the Box
 Keyboard with three-axis control joystick.
 5p screw terminal plug (RS422/RS485).
 12VDC Power Supply.
 This Manual.
Installation
 Power Supply Interface (5.5mm x 12mm center pin JEITA style jack):
12VDC / 2000mA power supply.
 RS485/422 interface (5p screw terminal):
1:485+/422TxA, 2:485-/422TxB, 3:422RxA, 4:422RxB, 5:485/422Gnd.
 RS232 interface (DB9M port): 2:Rx, 3:Tx, 5:Gnd.
Hardware Features
 Keys: momentary push buttons (keys).
 Joystick: 3-axis joystick.
 Digital display: LCD display.
Control Mode
 VISCA, PELCO-P and PELCO-D protocol support.
 Control interfaces:
o 5p Screw Terminal (RS485/RS422).
o DB9 (RS232).
 Baud rate: 1200, 2400, 4800, 9600, 19200.
 Parameters: 8 bits, 1 stop bit, No parity.