User Manual
Rev 1.1 12/15
STEP 1.
For masonry or drywall wall:
Position on wall and mark wall for anchor placement. Pre-drill
1/4 holes, minimum 1 deep.
For double gang electrical box:
Position over box with slots overlaying device mounting holes in
box.
STEP 2.
For masonry or drywall wall:
Place included anchors in wall and mount to anchors using in-
cluded #10 screws.
For double gang electrical box:
Mount to box using #6 screws and washers provided.
STEP 3.
Drill hole in wall through rear exit opening for cable access, or
use base exit opening.
STEP 4.
Mount camera to mount with included ΒΌ-20 screw.
Utilize (0, 1 or 2) 1/4 washers as required, depending upon
depth of threaded insert in base of the camera, in order to
achieve a snug fit. Connect all cables.