Instruction Manual

2PK TWS LED BLUETOOTH SPEAKER
INSTRUCTION MANUAL
SYLVANIA is a registered trademark of
OSRAM Sylvania Inc. used under license.
For service assistance and product information,
please call: 1-800-968-9853.
Curtis International Ltd.
www.curtisint.com
Made in China
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3
Model No.: SP926
DEAR CUSTOMER
In order to achieve the best performance of your product, please
read this instruction manual carefully before using, and keep it for
future reference.
NOTE
This unit may be submitted to changes in specifications, character-
istics and/or operation without prior notice to the user, in order to
continue improving and developing its technology.
Packing list
Upon opening the package, please check for the following items:
2 x Speakers
1 x USB charging cable
1 x Instruction manual
Specification
Power output: 3W
Input: DC 5V
Battery capacity: 300mAh
Transmission range: 10m
Dimension: (WXHXD): 75 x 75 x50 mm
Charging time: 1.5 hrs
Product overview
1
music and to answer a call. A second short press second will resume
playing music again.
2. Short press "vol-/Previous song”, the speaker will play the previ-
ous song
3. Short press "Vol+/Next song", the speaker will skip to the next
song
4. long press "vol-/Previous song", reduces speaker volume
5. long press "Vol+/Next song" increase speaker volume and you will
hear “maximum volume” when maximum volume is reached
Hands free phone call operation
1. When a phone call is incoming, hold and press "Play/Pause/-
Phone" key to reject the call.
2. When on an active call, short press "Play/Pause/Phone" to hang
up
3. When the Speaker is in standby/music mode, double press the
“Play/Pause/Phone" key to redial the last call.
Charging
Connect the charging cable to Micro USB jack and insert the other
end to the USB port of
5V charger. A red light will illuminate when charging and will switch
off when finished charging.
Warm tips
1. In order to avoid damage to your hearing and prolong the use-life
of speakers, please do not listen to music for long time in high
volume environment.
2. When a fault occurs, please immediately turn off the power switch
unplug the USB plug, prevent speaker and other components dam-
aged.
3. Over use of battery will affect the Bluetooth distance and use-life,
please charge in time.
3
1. On/Off/Play/Pause/Answer calls
2. Volume down/Previous song
3. Volume up/Next song
4. BT/Charging indicator light
5. Charging jack
6. Mic
ON/OFF
Hold the power button for about 3 seconds to turn on/off the speak-
er.
Pairing and Bluetooth Connection
1. Turn both speakers on at the same time. Speakers will start to
search for pairing after the audio message “Pairing”.
2. After audio message “Beep” from both speakers, the two speak-
ers are paired.
3. If not paired successfully, double push power button of one of the
speakers to search for pairing.
4. Turn on the Bluetooth function of your device and select Bluetooth
name “Sylvania SP926”. You will hear an audio message “Connect-
ed” after your device is connected to TWS speaker successfully.
Function
1. Short press "Play/Pause/Phone" key to pause or play/pause
Indicator Status
Type
BT Indicator
Indicator State
Ready to connectRapid flashing blue
Steady-on blue
Red
Connected
Charging Indicator
Light off Fully charged
Charging
2
FCC STATEMENTS:
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to oper-
ate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
To maintain compliance with FCC’s RF Exposure guidelines,
This equipment should be installed and operated with minimum
20cm distance between the radiator and your body: Use only
the supplied antenna.

4