User Manual

Size Selecon of the Pressure EEZ®
Comfort Cushion Plus™ Wheelchair Cushion
Simply select the cushion that would match the width of your hips when
seated. Cushion size should not be determined by the wheelchair seat width.
Improper cushion fit will affect the performance of pressure distribuon of the
cushion and its proper posioning support of the body.
The length of the cushion should be determined by placing the cushion at the
back of the wheelchair while the length extends to the front within 1" to 2" from
the back of the knees. The ischial tuberosies (sing bones) should be centered
in the seat in the center of the back seang area.
The footrest should be adjusted properly in order to enhance seang comfort
and help to lower peak seang pressures. In order to prevent the Comfort
Cushion Plus™ from sliding on the wheelchair upholstery, especially during
transfers, follow these instrucons:
COMFORT
CUSHION PLUS
COMFORT
CUSHION PLUS
Step 1. Thoroughly clean the surface of the wheel-
chair seat.
Step 2. Peel off the paper backing of the Velcro
strip provided and place 2" from the front, in the
center of the wheelchair seat, as shown.
Step 3. Place the cushion on the wheelchair. The
Velcro strip on the boom of the upholstered
Comfort Cushion Plus™ as well as the non-slip
surface and the Velcro strip placed on the seat will
prevent sliding when changing body posion while
seated.
To Clean the Cover
Remove the cover from the seat cushion. Machine wash in lukewarm water
and air dry. No ironing is required.
To Clean the Molded Foam Core
To clean the foam core simply spot clean or wipe with moist warm cloth.
Avoid submerging the base in water.
The Comfort Cushion Plus™ Warranty
Hudson Medical guarantees the Comfort Cushion Plus™ to be free from
defects in material and workmanship for a period of 24 months from the date
of purchase under normal use. Should defect occur, the cushion should be
returned by the customer to the place of purchase with original sales receipt.
Hudson Medical will determine if it is a manufacturing defect and replace or
repair the cushion without charge. This warranty does not apply to
punctures, tears and burns to the cushion or removable cover.
Now with Poly-Lite ™ for
Maximum Pressure Relief & Support
SKIN PROTECTION & POSITIONING – E2607 & E2608
3” Wheelchair Cushion
With Progressive Support Technology
(PST) for Custom Comfort
User Instrucon Manual & Warranty
™
MEDICAL PRODUCTS DIVISION
Richmond, Virginia 23231 • 800-343-8112
www.hudsonindustries.com
I2700863/1209
MEDICAL PRODUCTS