Owner manual

ManualsBrandsHudson Medical ManualsFor HomeBariatric 3 Supreme Low Contour

Size Selecon of the Pressure EEZ

Supreme

™

Low Contour Wheelchair Cushion

Simply select the cushion that would match the width of your hips when

seated. Cushion size should not be determined by the wheelchair seat

width. Improper cushion ﬁt will aﬀect the performance of pressure distribu-

on of the cushion and its proper posioning support of the body.

The length of the cushion should be determined by placing the cushion

at the back of the wheelchair while the length extends to the front within

1" to 2" from the back of the knees. The ischial tuberosies (sing bones)

should be centered in the seat in the center of the back seang area.

The footrest should be adjusted properly in order to enhance seang

comfort and help to lower peak seang pressures. In order to prevent the

Supreme™ Low Contour Cushion from sliding on the wheelchair upholstery,

especially during transfers, follow these instrucons.

To Clean the Cover

Remove the cover from the seat cushion. Machine wash in lukewarm

water and air dry. No ironing is required.

To Clean the Molded Foam Core

Simply spot clean or wipe with moist warm cloth. Avoid submerging in

water.

Step 1.

Thoroughly clean the surface of the

wheelchair seat.

Step 2. Peel oﬀ the paper backing of the Velcro®

strip provided and place 2" from the front, in the

center of the wheelchair seat, as shown.

Step 3. Place the cushion on the wheelchair. The

Velcro® strip on the boom of the upholstered

Supreme™ Low Contour Cushion as well as the

non-slip surface and the Velcro® strip placed on

the seat will prevent sliding when changing body

posion while seated.

The Supreme

™

Low Contour Cushion Warranty

Under normal use Hudson Medical guarantees the Supreme™ Low Contour

Cushion to be free from defects in material and workmanship for a period of 24

months from the date of purchase. Should defect occur, the cushion should be

returned by the customer to the place of purchase with original sales receipt.

Hudson Medical will determine if it is a manufacturing defect and replace or

repair the cushion without charge. This warranty does not apply to punctures,

tears and burns to the cushion or removable cover.

THE

SUPREME

THE

SUPREME

Now with Poly-Lite

™

for

Maximum Pressure Relief & Support

SKIN PROTECTION & POSITIONING – E2607 & E2608

Low Contour Wheelchair Cushion

With Progressive Support Technology

for Custom Comfort

User Instrucon Manual & Warranty

™

Richmond, Virginia 23231 • 800-343-8112

www.hudsonindustries.com

I275863LC/0610

Summary of content (2 pages)

PAGE 1
Simply select the cushion that would match the width of your hips when seated. Cushion size should not be determined by the wheelchair seat width. Improper cushion ﬁt will aﬀect the performance of pressure distribution of the cushion and its proper positioning support of the body. The length of the cushion should be determined by placing the cushion at the back of the wheelchair while the length extends to the front within 1" to 2" from the back of the knees.
PAGE 2
HUDSON Use and Application of the Pressure EEZ® Supreme™ Low Contour Cushion for Positioning for Pressure Relief and Comfort THE SUPREME Low Contour Wheelchair Cushion The Pressure EEZ® Supreme™ Low Contour Cushion with Poly-Lite™ reduces the likelihood of pressure sores by reduction of pressure while positioning for comfort and safety.