Owner's manual

StackLink User Manual Hudson Robotics, Inc.

 NOTE: Be sure to match the correct instrument nest name from the pull down

menu or errors will occur when attempting to run methods.

 HINT: Clicking on the Test Button will allow you to test the operation of LabLinx

by allowing you to dispense, return, and shift plates.

Setting Up Plate Parameters

Entering correct dimensions for the plates you will be using is used only for the proper

handling of those plates by the PlateCrane EX as it automatically adjusts its positions for

each different plate-type used in every method based solely on the information entered

into that plate’s definition.

While not running a method, the user may click on the ‘Plates’ button located just above

the first configured instrument panel on SoftLinx’ ‘Run’ screen. The following ‘Plate

Setup’ form will be displayed:

Figure 13