Owner's manual

StackLink User Manual Hudson Robotics, Inc.
28
20. SETIP {IP Address}
SETIP will set the IP address of the unit. This change is immediate and may cause
loss of communication if used during a TCP/IP session.
Example:
Command: SETIP 10.1.1.5
Response: 0000 Success <13><10>
21. SETMOVETIME {Timeout}
SETMOVETIME sets the number of seconds the StackLink waits for a plate to
arrive at its destination before returning an error.
Example:
Command: SETMOVETIME 30<13><10>
Response: 0000 Success<13><10>
22. SETSTOPDELAY {DelayTime}
SETSTOPDELAY sets the amount of time the StackLink will wait before closing the
stops if a plate is placed on the track by another instrument. The DelayTime is in
milliseconds.
Example:
Command: SETSTOPDELAY 300<13><10>
Response: 0000 Success<13><10>