Installation Guide

L114,116

Hudson Valley Lighting, Inc.

P.O. Box 7459

106 Pierces Road

Newburgh, NY 12550

(800) 814-3993

www.hudsonvalleylighting.com

IMPORTANT:

Always unplug the power before installing or replacing

bulb and before cleaning or other maintenance.

INSTALLATION

1.Remove the table lamp and parts bag(s) from the carton.

Before discarding the carton,double check packing to make

certain that all parts are found.

2. assemble the lamp.

3. Attach the harp to the table lamp.

4. Carefully remove protective cover on the shade. Place

shade on the stem, and secure with finial.

5. Install bulb. (not included).

6. Plug cord into wall outlet. Dimmer switch in socket.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the finish,avoid any harsh abrasives or

chemicals.

PAGE 1
L114,116 IMPORTANT: Always unplug the power before installing or replacing bulb and before cleaning or other maintenance. INSTALLATION 1.Remove the table lamp and parts bag(s) from the carton. Before discarding the carton,double check packing to make certain that all parts are found. 2. assemble the lamp. 3. Attach the harp to the table lamp. 4. Carefully remove protective cover on the shade. Place shade on the stem, and secure with finial. 5. Install bulb. (not included). 6. Plug cord into wall outlet.