Bluetooth Headset User Guide HCB20 has a feature of even weight, wearing it on both sides of your ear comfortably, almost without feeling it.
Index 1. Notice before using 2. Package List 3. Product Introduction 4. Charging the Headset 5. Power On/ Off 6. Pairing the Headset (or any Bluetooth Device) 7. Wearing the Headset 8. Answering calls 9. Refusing calls 10. Ending calls 11. Voice Dialing 12. Redialing 13. Mute 14. Transferring calls 15. Maintaining calls 16. Ending Call 1 and answering Call 2 17. Triple Phone Conversation 18. Adjusting the Volume 19. Safety Instruction 20. Specifications 21. Excluding Problems 22.
1. Notice before using Thank you for purchasing our Bluetooth Headset HCB20. First of all, please check to find everything in your package and carefully study the user guide to know the function details. HCB20 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone designed with Audio Gateway (HCB18/ HCB21), PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in, etc.
3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Ear Hook Decrease Volume key (-) 1 Increase Volume key (+) 2 Note: ● For first time use, make sure to fully recharge the Headset battery. 4. Charging the Headset HCB20 comes with a Lithium Polymer battery built-in.
1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed, the red indicator will shut off or flashes red. Note: Charging time is around 90~120 minutes. ● For first time use, make sure to fully recharge the Headset up to 4 hours. After a long time of not using it (around one month), while recharging, it takes a while for the indicator to turn red.
will turn on after the indicator flashes the blue light 3 times. 2. To turn the power off, press and hold the function button for 2~3 seconds until you see the red indicator flash 3 times. Note: ● While turning the Headset on, you will hear the “Du Du” sound from the receiver. The blue indicator light will flash 5 times, then 2 times, and after repeating this for 5 times, the indicator will flash the blue light every 3 seconds to come into a standby mode.
start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCB20. 5. Please choose and confirm HCB20. 6. Key in the Headset Password “0000” and press YES. If the pairing is successful, the indicator turns to flash the blue light only. For some mobile phones, after pairing you may have to select and confirm HCB20 again to start the connection.
● Even though the following situations happen, the paired devices remain pairing. - The power for one of the devices is off. - The service for one of the devices is off. - One of the devices is re-switched on. 7. Wearing the Headset According to your preference, adjust the headset on your left or right ear.
8. Answering the calls 1. While there is a call coming, wait until you hear the ringing from your Headset receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the function button. 3. While answering the calls, the blue indicator light flashes 4 times each second. 4. If the mobile phone is ringing and your Headset is off, turn on your Headset first, then press the function button to answer the call. 5.
not the same as the ringing sound of the mobile phone, such as Motorola… 9. Refusing calls Wait to hear the ringing from your receiver, then press and hold the function button for 2~3 seconds until you hear the “Du” sound to refuse the calls. 10. Ending calls 1. When the conversation is over, press the function button to end calls. 2. Wait until the other end hangs up the phone to end calls. 11. Voice dialing 1.
. Redialing 1. If your mobile phone supports the redialing function, you can use this function with your Headset too. 2. Under the standby or connecting mode, press the decrease volume key (-) of the Headset for 2~3 seconds until you hear the “Du” sound to redial the last call. 13. Mute 1. During a phone conversation, press the decrease (-) and increase (+) volume key at the same time until you hear the “Du” sound, then the other end will not hear you. 2.
Note: ● To activate this function, your mobile phone must support the Handsfree mode. For more details, please check the manual of your mobile phone. 15. Maintaining calls 1. When you are answering the call with the Headset, press the decrease (-) volume key for 2~3 seconds until you hear one “Du” sound, then the call will be maintained. If there is an interrupting call coming, the Headset will answer it automatically. 2.
will be ended and the interrupting call (Call 2) will be answered automatically. Note: ● To activate this function, please make sure the assigned telecommunications agent provides this service. ● To activate this function, please refer to the instructions of your mobile phones manual to make sure your phone program supports this function. 17. Triple phone conversation 1. While you are answering Call 1 from your Headset and having the interrupting call, you will hear the notifying “Du Du” sound.
communications agent supports this service. ● To activate this function, please refer to the instructions of your mobile phones manual to make sure your phone program supports this function. ● When the triple phone conversation is on board, it can not return to the mode of having only Call 1 or Call 2. ● When the triple phone conversation has not been activated, you can press the decrease (-) volume key for 2~3 seconds to easily transfer the calls between Call 1 and Call 2.
3. Do not use the cleaning liquid or spray to clean the Headset. 4. Do not clean the Headset while charging it. 5. Do not disassemble the Headset. If you encounter a problem, contact the retailer shop. ● Urgent handling -If you enconter a problem, turn the Headset off first. -If the inside components breakdown, please contact the repairing center to ask for immediate support and service. 20. Specification 14 Product Model No. HCB20 Standard Convention/ Signal Output Bluetooth V1.
Operation Temperature -10 ~ 55 ℃ Facility Saving Temperature -20 ~ 60 ℃ Operation Moisture 10% ~ 90% (non-concrete status) Weight 15 g (battery included) Size 60.5x22.7x13mm Safety Regulation CE, FCC, BQB 21. Excluding Problems 1. The Headset flashes the red indicator light: The battery is low, please recharge your Headset. 2. If after recharging for 20 minutes, the Headset does not turn on: For initial use, the power will be on after charging the Headset at least for 40 minutes.
- Make sure your mobile phone has a good signal. - Some Bluetooth mobile phones support only one Headset, if you pair it with more than one Headset, it may cause the other Headsets being cut off. 22. Storage of the Headset - Using the non-original accessories, it may debase the product’s function, cause the product damage, electrical conflict and the termination of the warranty. - Do not disassemble the Headset, it may damage the Headset accidentally or cause the warranty invalidation.
- Only authorized and qualified personnel can do battery changing. - Under the normal usage, the rechargeable battery can be used for the long time. - The battery must be recharged within temperatures of -10 ℃ to 45℃. - Using the Headset under room temperature enables the battery to achieve its maximum capacity. - Under a chilly environment, it may cause the battery’s capacity to decrease. - Recharge the Headset at least once every two months, either you use it or not. 23.
tooth V1.2, Class II, the longest working distance is 10 meters. But, this working distance may be shortened by the interference existed in the surroundings and due to the insufficient Bluetooth function of the mobile phone. Q : Why does my Bluetooth mobile phone find many Bluetooth devices while searching for the new Bluetooth device? A : Most of the mobile phones are allowed to find more than one Bluetooth device within the working range.
(2) The working range between the Headset and the mobile phone has been exceeded. Please make sure the Headset and mobile phone are within the working range of 10 meters and there is no obvious interference between. Q : What can I do if the voice from the Headset is not clear? A : Make sure your mobile phone is in a location with a better signal and increase the volume of the mobile phone or the Headset. Q : Why is the Headset suddenly not working? A : (1) The Headset might be out of power.
FCC (FCC ID: RL9-HCB08): HCB20 is FCC certificated as this device complies with part 15 of the FCC rules. It is built with new housing, extended from HCB08. European CE 0678: HCB20 has been manufactured in accordance with the European R& TTE directive. It complies with the European Low Voltage Directive 73/23/EEC and the European EMC Directive 89/336/EEC. BQB Qualification: HCB20 Bluetooth Headset, a BQB Qualified Bluetooth product is listed as qualified End Product in accordance to section 6.2.
____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ___________________________________