Bluetooth Headset User Guide HCB08 has a feature of even weight, wearing it on both sides of your ear comfortably, almost without feeling it.
Index 1. Notice before using 2. Package List 3. Product Introduction 4. Charging the Headset 5. Power On/ Off 6. Pairing the Headset (or any Bluetooth Device) 7. Wearing the Headset 8. Answering calls 9. Refusing calls 10. Ending calls 11. Voice Dialing 12. Redialing 13. Mute 14. Transferring calls 15. Maintaining calls 16. Ending Call 1 and answering Call 2 17. Triple Phone Conversation 18. Adjusting the Volume 19. Changing the Panel 20. Safety Instruction 21. Specifications 22.
1. Notice before using Thank you for purchasing our Bluetooth Headset HCB08. First of all, please check to find everything in your package and carefully study the user guide to know the function details. HCB08 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone designed with Audio Gateway (HCB18/ HCB21), PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in, etc.
3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Ear Hook Decrease Volume key (-) 1 Increase Volume key (+) 2 Panel Note: ● For first time use, make sure to fully recharge the Headset battery.
4. Charging the Headset HCB08 comes with a Lithium Polymer battery built-in. 1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed, the red indicator will shut off or flashes red. Note: Charging time is around 90~120 minutes. ● For first time use, make sure to fully recharge the Headset up to 4 hours.
5. Power On/ Off 1. Press and hold the function button for 2~3 seconds, the power will turn on after the indicator flashes the blue light 3 times. 2. To turn the power off, press and hold the function button for 2~3 seconds until you see the red indicator flash 3 times. Note: ● While turning the Headset on, you will hear the “Du Du” sound from the receiver.
indicator light flashes with the red indicator light to enter the pairing mode. 3. Ensure your mobile phone has the Bluetooth function and start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCB08. 5. Please choose and confirm HCB08. 6. Key in the Headset Password “0000” and press YES.
the device asks for the Password, please key-in “0000”. For more details, please check the manual of your Bluetooth device to proceed the operation. ● Even though the following situations happen, the paired devices remain pairing. - The power for one of the devices is off. - The service for one of the devices is off. - One of the devices is re-switched on. 7. Wearing the Headset According to your preference, adjust the headset on your left or right ear. 8.
1. While there is a call coming, wait until you hear the ringing from your Headset receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the function button. 3. While answering the calls, the blue indicator light flashes 4 times each second. 4. If the mobile phone is ringing and your Headset is off, turn on your Headset first, then press the function button to answer the call. 5.
sound to refuse the calls. 10. Ending calls 1. When the conversation is over, press the function button to end calls. 2. Wait until the other end hangs up the phone to end calls. 11. Voice dialing 1. If your mobile phone supports the voice dialing function, you can use this function with your Headset too. 2. Under the standby or connecting mode, press the function button of the Headset and follow the mobile phone instructions to proceed with the voice dialing.
13. Mute 1. During a phone conversation, press the decrease (-) and increase (+) volume key at the same time until you hear the “Du” sound, then the other end will not hear you. 2. Under the mute mode, you will hear the intermittent “Du” sound. 3. Press either the increase (+) or decrease (-) volume button to end the mute function. 14. Transferring calls 1.
1. When you are answering the call with the Headset, press the decrease (-) volume key for 2~3 seconds until you hear one “Du” sound, then the call will be maintained. If there is an interrupting call coming, the Headset will answer it automatically. 2. Press the decrease (-) volume key for 2~3 seconds until you hear one “Du” sound to end the maintaining call function. Also do this to renew the call.
● To activate this function, please refer to the instructions of your mobile phones manual to make sure your phone program supports this function. 17. Triple phone conversation 1. While you are answering Call 1 from your Headset and having the interrupting call, you will hear the notifying “Du Du” sound. Press the decrease (-) volume key for 2~3 seconds until you hear the “Du” sound, Call 1 will be maintained and the interrupting call (Call 2) will be answered automatically. 2.
● When the triple phone conversation has not been activated, you can press the decrease (-) volume key for 2~3 seconds to easily transfer the calls between Call 1 and Call 2. ● If Call 1 is maintained and Call 2 is on line, quickly press the function button to end Call 2 and renew Call 1. 18. Adjusting the Volume During a call, you may adjust the Headset’s volume. 1. To increase the volume, press the increase (+) volume key. 2. To decrease the volume, press the decrease (-) volume key.
2. Avoid damaging the inside or outside panel by something hard or sharp. 3. If the function button becomes hindered after changing the panel, push the panel towards the top to avoid getting stuck. 20. Safety instruction 1. Read the Headset manual carefully and use the headset correctly by following the instructions.
2. Keep the Headset away from children, avoid children from swallowing it accidentally. 3. Do not use the cleaning liquid or spray to clean the Headset. 4. Do not clean the Headset while charging it. 5. Do not disassemble the Headset. If you encounter a problem, contact the retailer shop. ● Urgent handling -If you enconter a problem, turn the Headset off first. -If the inside components breakdown, please contact the repairing center to ask for immediate support and service. 21.
Power Capacity Rechargeable Li-Polymer Power Supply 5V DC, 100~240V AC adapter Operation Temperature -10 ~ 55 ℃ Facility Saving Temperature -20 ~ 60 ℃ Operation Moisture 10% ~ 90% (non-concrete status) Weight 14.5 g (battery included) Size 69.6x20.8x11.8 mm Safety Regulation CE, FCC, BQB 22. Excluding Problems 1. The Headset flashes the red indicator light: The battery is low, please recharge your Headset. 2.
- Make sure the Headset is on. - Make sure the distance between the Headset and the paired Bluetooth device is within 10 meters. - Make sure your mobile phone has a good signal. - Some Bluetooth mobile phones support only one Headset, if you pair it with more than one Headset, it may cause the other Headsets being cut off. 23. Storage of the Headset - Using the non-original accessories, it may debase the product’s function, cause the product damage, electrical conflict and the termination of the warranty.
[Battery] - New battery: for first time use, please fully recharge the battery for 4 hours. - Only authorized and qualified personnel can do battery changing. - Under the normal usage, the rechargeable battery can be used for the long time. - The battery must be recharged within temperatures of -10 ℃ to 45℃. - Using the Headset under room temperature enables the battery to achieve its maximum capacity. - Under a chilly environment, it may cause the battery’s capacity to decrease.
Q : How far is the working distance between the Headset and the mobile phone? A : Since HCB08 is certificated by BQB, compliable with Bluetooth V1.2, Class II, the longest working distance is 10 meters. But, this working distance may be shortened by the interference existed in the surroundings and due to the insufficient Bluetooth function of the mobile phone.
A : It may be the following two reasons: (1) Your location has a bad signal, please move to a location with a better signal. (2) The working range between the Headset and the mobile phone has been exceeded. Please make sure the Headset and mobile phone are within the working range of 10 meters and there is no obvious interference between.
Please refer to the manual of your mobile phone. 25. Declaration of Conformity FCC (FCC ID: RL9-HCB08): HCB08 is FCC certificated as this device complies with part 15 of the FCC rules. It is built with new housing, extended from HCB08. European CE 0678: HCB08 has been manufactured in accordance with the European R& TTE directive. It complies with the European Low Voltage Directive 73/23/EEC and the European EMC Directive 89/336/EEC.