Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik User Manual Daimler LFSPG-MH History of changes Version 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Date 18.09.2018 27.09.2018 31.01.2019 22.05.2019 31.05.2019 25.06.2019 25.06.2019 26.06.2019 2019-06-26 Editor DK DK JB JB PW PW PW PW Changes / Comments Initial release Completion of technical data Correction, for internal use only Correction, FCC ID Correction, FCC 15B Correction, Notice FCC 15.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik Regulatory Information for USA and Canada NOTICE: This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik List of abbreviations / Glossary API.DLL Download Driver Software interface to enable interaction between the application and a device. Firmware Installation of the Key Reader Software Interface between hardware device and operating system Firmware Program which is installed on the Key Reader Flash Tool Windows Software to install the Key Reader Firmware IR LED LF LFSPG-MH SPG.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik Contents REGULATORY INFORMATION FOR USA AND CANADA....................................................................................... 2 1. INTRODUCTION ...................................................................................................................................................... 5 1.1. 1.2. 1.3. 1.4. 2. TRADE MARKS ..................................................................
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 1. Introduction 1.1. Trade marks Windows, Windows NT and other names of Microsoft products which are mentioned in this manual are registered trade marks of the Microsoft Corporation. Other trade marks and product names mentioned in this manual are trade marks belonging to their legal owners and are hereby acknowledged as such. 1.2.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 2. Warnings and Safety Instructions This device must not be disposed of in domestic waste. Always dispose of electronics at the designated collection facilities. Warning! Place the device on a horizontal and stable surface and secure the connecting cables. Otherwise there is a risk of injury due to the device falling down.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 4. Installation To install the driver under all specified Windows operating systems you must have administrator rights. This is a default setting from Microsoft. 4.1.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 4.3.1. Installing the USB driver on Windows XP After connecting the LFSPG-MH to the computer, it will be recognized automatically by Windows. A message is displayed on the screen indicating „Welcome to the Found New Hardware Wizard“. In the following dialog, select the option: No, not this time and press Next Fig.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik When the following dialog appears, click on: Continue Anyway Fig.5: Installation warning Wait for the files to be installed. Fig.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik After completion click on: Finish Fig. 7: Completing the installation Installation is complete now.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 4.3.2. Installing the USB driver on Windows 7 After connecting the LFSPG-MH to the computer for the first time it will be recognized automatically by Windows. A message is shown on the screen, that the driver will be installed. Fig. 8: Windows install message After a short time an error message appears, indicating the driver was not installed. Fig.9: Error Message The driver has to be installed manually.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik Fig.11: Selection of automatic or manual installation The driver files are in the USB Driver folder on the CD ROM. Choose the folder and press Next. Fig.12: Search for the driver When the following dialog appears, click on: Install this driver software anyway.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik Fig.13: Installation warning Wait for the files to be installed. Fig.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik Fig. 15: Completing the installation Now installation is complete.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 4.4. Installation of SPG.DLL The SPG.DLL represents the software interface between an application program and the SPG. This file must be present on the target system. The path where the SPG.DLL must reside is different for 32-bit and 64-bit operating system versions. 4.4.1. 32bit operating system When using the 32-bit DLL which SPG.DLL must be copied into the Windows System32 subdirectory. 4.4.2.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 5. Status Indication by LED Two status indicating LED’s are integrated in the LFSPG-MH. The upper LED indicates the status of the device hardware, the second LED indicates the status of communication between the LFSPG-MH and car key.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 6. Flashing Firmware To change the firmware of the device a separate Windows program (Flash Tool) is used. Before starting the Flash Tool, any programs that access the key programmer, must be terminated. Any firmware version can be copied to the key programmer, thus also downgrade the firmware is possible at any time. The current firmware version of the LFSPG-MH can not be saved.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik The LFSPG-MH is restarted after successful Flash process and the new firmware is active. After closing the program, the LFSPG-MH can be used again by another application program. If the Flash process was not completed correctly or the LFSPG-MH is not working anymore, restart the Flash process. 7.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 8. Technical Data General Data Trade name: Daimler LFSPG-MH Housing: non-conductive, glass-fibre reinforced plastic housing, Size: 118mm * 63mm * 175mm (w * h * d) Ambient temperature: 5°C to 35°C, not condensing Power supply: 12VDC+-10%, max. 1A, extra-low voltage socket Maximum power consumption: max.
Huf Tools Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik 9. Declaration of Conformity The Declaration of Conformity (DoC) is available as a separate document.