User's Manual

Huf Tools
Automation · Prüftechnik · Formenbau · Kunststofftechnik · RFID Systeme · Lasertechnik
2019-06-26 G – User Manual Daimler LFSPG-MH Page 5 of 20
1. Introduction
1.1. Trade marks
Windows, Windows NT and other names of Microsoft products which are mentioned in this manual are
registered trade marks of the Microsoft Corporation. Other trade marks and product names mentioned in this
manual are trade marks belonging to their legal owners and are hereby acknowledged as such.
1.2. System requirements for operating the Key Reading Station
To install and start the Key Reading Station software, your system must meet the following minimum
requirements:
 Pentium (at least 500MHz) or higher processor
 Windows XP or Windows 7 (32bit or 64bit)
 Installed Java Runtime Environment
 30 MB free storage space
 A free serial or USB interface
1.3. Unpacking the LFSPG-MH Key Reader
Please check the packaging for possible damage during transport. If the packaging is badly damaged, you
should not install the device.
1.4. Scope of supply
 Key Reader Daimler LFSPG-MH with fixed USB connection cable
 Plug-in power supply (12VDC, 2A)-
Fig. 1: Daimler LFSPG-MH