Owner’s Manual 16” Green Machine Assembly Instructions THIS DOCUMENT CONTAINS IMPORTANT SAFETY INFORMATION. READ AND KEEP FOR FUTURE REFERENCE. Date of Purchase: ___________________ Please write the date of purchase. You should also retain the sales receipt.
Safety and Warning Information PLEASE READ AND FULLY UNDERSTAND THIS OWNERS MANUAL BEFORE OPERATING THE PRODUCT This symbol is important. It is the WARNING symbol. The warning symbol precedes safety instructions. Failure to follow these instructions may result in injury to the rider or to others, or damage to the product. All wheeled vehicles will provide safe, enjoyable transportation and recreation when used and maintained properly.
Safety and Warning Information - continued • • • • • • • • • • • • • Do not tow the product. Do not pull any objects with the product. Do not push the product. Never ride with more than one person. Maximum weight is 80 lbs (36Kg). This product should only be used by persons 5+ years of age. Excessive weight may cause a hazardous or unstable condition. Replace worn or broken parts immediately. If anything does not operate properly, discontinue use. Understand all operating procedures before riding.
Assembly Notes Tools necessary for assembly: Phillips screwdriver The instructions in this manual refer to the right and left side of the product, these are defined from the rider position. Do not discard any parts until the unit is completely assembled. WARNING: Wheels & Axle: • The wingnuts must be securely tightened to ensure rear wheels do not come loose from the axle. • All hardware must be sufficiently tightened to ensure it does not come loose.
NOTE: APPLY LABELS PRIOR TO ASSEMBLY 001 LABEL SHEET (both sides) (both sides) “Huffy” and “Green Machine” are registered trademarks of Huffy Corporation 5 5
1 305 336 note 341 316 315 338 301 337 300 315 316 346 341 note (x2) 341 x 1 315 x 1 316 note WING BOLT MUST BE FULLY TIGHTENED BY HOLDING WING BOLTS AT BOTH ENDS OF AXLE.
2 304 303 304 303 345 302 305 306 345 300 x 2 304 301 x 2 345 x 2 303 7 7
3 308 B A 307 306 310 342 309 C 306 x 1 310 Limiter Pin x 1 307 8 8
4 335 335 A 313 335 334 B 335 316 315 314 312 311 note 334 ENSURE BUSHING IS IN PLACE BEFORE ASSEMBLY x2 x2 334 335 C 9 9
5 note WING BOLT MUST B BE FULLY TIGHTENED BY HOLDING WING BOLTS AT BOTH ENDS OF AXLE.
6 319 320 319 318 A B C D 319 319 note OPPOSITE SIDE 11 11
7 note ROUND HOLES HEX HOLES note 323 321 321 322 324 note ORIENTATION OF NUT 323 320 x 4 324 x 4 322 12 12
8 310 326 LH note INSERT SCREWS FIRST 325 RH note TURN UNIT UPSIDE DOWN 323 321 x 4 310 13 13
9 310 328 TOP 329 310 BOTTOM 328 TOP 329 x8 320 BOTTOM 310 14 14
10 333 331 332 310 343 344 x6 x2 310 344 15 15
332 344 333 331 336 307 308 309 310 342 343 310 305 301 300 318 302 334 311 337 303 304 345 313 335 341 316 315 338 346 321 323 322 324 320 319 312 314 315 316 317 325 326 310 328 329 310 16 16
ASSEMBLY PARTS LIST PAGE-ID No. DESCRIPTION PAGE-ID No.
Warranty Information Part or model specifications are subject to change without notice. This Limited Warranty is the only warranty for this product. There are no other expressed or implied warranties. The only uses for this product are described in this manual. Warranty registration is not required. This limited warranty extends only to the original consumer and is not transferable.
Warranty Information - continued What will the manufacturer do? The manufacturer will replace, without charge to you, any component that does not meet this warranty. The original owner must pay all labor and transportation charges associated with the repair or warranty work. How do you get service? Phone Customer Service What rights do you have? This Limited Warranty gives you specific legal rights. You may also have other rights which vary from state to state.
CORRECT WARNING: ALWAYS WEAR YOUR HELMET WHEN RIDING THIS PRODUCT! INCORRECT • Helmet should sit level on your head and low on your forehead • Adjust the strap sliders below the ear on both sides. • Buckle the chin strap. Adjust strap until it is snug. • No more than two fingers should fit between the strap and your chin. • A proper fitting helmet should be comfortable and not rock forward/backward or side to side.