User Manual

BCD A

Assembly

FRONT WHEELS:

1. Install front wheels (A) onto both sides of the front axle (B).

2. Install wheel hardware (C) on each Axle and tighten securely.

3. SNAP Wheel Covers (D) into position.

REAR AXLE ASSEMBLY: CUT 4 ZIPTIES

1. Install both drive motor gearboxes (A) over rear axle tube (B) as shown.

2. Rotate this assembly up and pull crossbar (C) so it points straight down.

3. Rotate assembly down so that suspension shaft (D) LOCKS into lock-mount (E).

4. Gently pull up on assembly to check it does not come lose.

Operation

Operating the Vehicle:

STEPS:

• Turn on Power Switch (A).

• Set Direction Switch (B) to FORWARD or REVERSE.

• Select SPEED by putting Speed Switch (C) to FAST or SLOW.

• Press Foot Switch (D) to move in selected direction (headlight turns on when car moves).

• Release Foot Switch - Motor friction will gradually stop vehicle.

WARNING: Vehicle will take longer to stop in FAST mode!

• Siren sound and Light Switch: (E)

• Horn Button: (F) (G)

• Insert the MEGA phone plug (H) into the dashboard. Press the button (I) to speak and

attach MEGA phone on dash hook.

CAUTION: Do NOT change Direction Switch (B) while moving - this can damage

the unit and cause person injury.