User Manual

16
Assembly
Assembly
B
C
A
A
STEPS:
• Connect the battery plugs (A)
 rmly.
STEPS:
1. Install seats by installing back
tabs (A) into car slots (B), then
snapping bottom tabs (C) into
place.
2. Gently pull up on seat to make
sure they do not come lose.
NOTE: Press Tabs (C) to release Seats.
13
Assembly
Assembly
FORWARD
FORWARD
A
A
B
C
B
ACD
STEPS:
1. Use M8 spanner to remove the wheel hardware from rear axle (A) - set aside.
2. Insert rear axle through motors (B) and axle shaft (C) so that it extends out each side
equally.
REAR WHEELS:
1. Install rear wheels (A) onto both sides of the axle (B).
2. Using M8 spanner, install wheel hardware (C) on each Axle and tighten securely.
3. SNAP Wheel Covers (D) into position.