User Manual

14
Assembly
Assembly
B
A
A
C
D
B
C
STEPS:
NOTE: Doors are Left and Right.
1. Install each door so that front
pivot (A) sits in door frame hole.
2. With door fully in place, install
two screws (B) each door then
SNAP door hinge brackets (C) into
top of door and into body slots.
3. Check operation of door: It should
snap closed into rear frame slot
(D).
STEPS:
1. Firmly connect plugs (A) and put
excess wire up into steering wheel
(B).
2. Install steering wheel (B) so that
notches SNAP into place (C)
3. Gently pull up on steering wheel
to check it does not come lose.
NOTE: Press the side buttons to
release the steering wheel .
Hold wire away and do not cover when installing
Door Bracket (C)!
15
A
A
A
B
B
B
C
A
B
Assembly
Assembly
STEPS:
NOTE: Hold plugs (A)  rmly so they do
not drop inside car body.
1. Firmly connect plugs (A) and put
excess wire down into car body.
2. Install Windshield so that Tabs (B)
line up (tuck excess wire into body)
and SNAP into position.
STEPS:
1. Install breather pipe (A) by lining
up tabs with slots in body (B) and
pressing  rmly into place.
Ensure top tab is in slot before
snapping bottom in place!
STEPS:
1. Install rear railing (A) by lining up
tabs (B) and slots (C) and snapping
 rmly in place.
2. Gently pull up to check it does not
come loose.
STEPS:
NOTE: Mirrors are Left and Right.
1. Install both mirrors (A) as shown
by  rmly snapping them into
windshield mounting holes (B).
2. Gently pull out to check they do not
come loose easily.
WARNING: Rear Bed is NOT a seat for children or pets!
• MAX weight 25 lb (11 kg).