Instructions / Assembly

8
Charging the Drive Battery
Charging Drive Battery
B
A
C
D
1. Charge Drive Battery after 1-2 hours of use or when the vehicle does not move at its
normal speed.
2. Ensure Power Switch is not activated.
3. The Charger Socket
B
is located at rear end of the Trike as shown.
4. First insert the Charger Cord
A
into the Charger Socket
B
and then insert the Charger
C
into the Wall Socket
D
.
5. After charging is complete (8 to 12 hours - never longer than 20 hours) unplug the
charger from the wall outlet.
6. Unplug the charger from the charger socket.
NOTE: The charger may feel warm during the charging. This is normal and not a cause for
concern. If excessively hot, unplug and replace.
Charging the Drive Battery
NOTE: Before rst use, charge battery 8 to 12 hours.