Instructions / Assembly

Maintenance

FOLLOW THESE STEPS IF THE BATTERY NEEDS TO BE REPLACED:

NOTE: Batteries are installed, mounted and wired di erently depending on model. Make

a simple drawing on paper (or take pictures) how your battery is installed and how Red

and Black wires are connected.

NOTE: Remove seat screws and seat (varies depending on model).

1. Remove any clamps and Battery Covers.

2. Disconnect wires.

3. Carefully lift out the Battery.

• Depending on the condition of the battery (i.e.: leakage) you may want to wear

protective rubber gloves before removal.

• Do not lift the battery by its connectors or cables.

4. Place the dead batteries in a plastic bag.

5. Install replacement battery(s) in same position and orientation as originals.

6. Re-connect all wires in

original positions.

7. Re-install Battery Covers

and hold-down clamps and

screws.

WARNING:

Ensure no wires are pinched or

bound up.

8. Re-Install seat and screws.

Drive Battery Replacement