Instructions / Assembly

11
WARNING: To prevent steering system damage and possible loss of control,
completely seat Stem (1) onto Fork Tube (E).
Threadless Style Stem:
Note: This procedure applies to both
the two-bolt Stem and four-bolt Stem
(fi gs 01b and 01c):
1. Insert the Stem (1) onto the Fork
Tube (E).
2. Point the Stem (1) towards the
front of the bike and in line with
the fork.
3. Tighten the stem bolts (C) se-
curely.
4. Place Cap into stem and tighten
screw securely (D).
D
1
E
C
g 01b
WARNING: Do not over tighten
the stem bolts (C). Over tightening the
stem bolts can damage the steering
system and cause loss of control.
WARNING: The Front Brake
(28) must be positioned in FRONT of
the Fork (4) (fi g 01a)
D
1
C
E
g 01c
Handlebar and Stem Installation
Assembly