Instructions / Assembly

21
Final Brake Adjustment Before Riding
Check tightness of the cantilever mounting Bolt
A
( g A):
• Make sure each cantilever mounting Bolt is tightened securely.
Center brake shoes on rim:
1. Turn the Adjustment Screw
B
on
the cantilever arm to move the arm
in or out so each Brake Shoe
C
is
the same distance from the rim.
2. Squeeze the brake lever two times.
3. Do this step again, until both brake
shoes are the same distance from
the rim.
A
C
B
g A
• In ate Tires to recommended
pressure on Tire side wall.
• Make sure Tire is centered in
Fork.
• If Needed, Re-attach Front
Brake Cable:
• Squeeze the two Brake
arms together
A
.
• Insert the Brake
Cable Guide
B
into the cutout
in the Guide
Bracket
C
.
• Make sure the
Brake Cable
Guide
B
is
seated securely
in the Guide
Bracket
C
cutout.
B
B
C
C
A
A
Linear Pull Brake System Adjustment - Before Starting
IF EQUIPPED: The Following Sections Describe Final Brake System Adjustments Re-
quired Before Riding.
Brake System