Instructions / Assembly

9
Assembly
HANDLEBAR BELL INSTALLATION:
1. Remove screws from Bell.
2. Position Bell on handlebar within easy reach,
with hands on the handlebar grips.
3. Install screws and tighten.
NOTE: Bell may attach with 1 or 2 screws.
BAG OR BASKET INSTALLATION:
Attach Bag
A
or Basket
B
to Handlebar using
the two Straps.
Tighten Straps so Bag/Basket does not move.
NOTE: Do not over tighten. The Straps may break.
WATER BOTTLE AND CAGE:
1. Remove the Water Bottle from the
Cage
A
.
2. Locate the Cage Screws
B
- they
may be packaged with the Water
Bottle Cage or installed in the Bicycle
Frame.
3. Position the Cage in the desired
location and install the two Cage
Screws through the Cage and into
the Frame Nuts
C
.
4. Tighten securely. Do not over
tighten, this can damage the Frame
Nuts.
5. Insert the Water Bottle into the Cage
as shown.
Accessories (various models)
B
A
A B
C