Owners manual

12
Assemble the Front Wheel to the Fork
Loosen the Front Brakes:
1. Squeeze the two Brake arms together
(A).
2. Lift out the Brake Cable Guide (B) from
the Guide Bracket (C).
Install the Front Wheel:
3. Set the Front Wheel (3) into the front
fork (4) (fi g 03).
4. Install wheel retainers (5) making sure
the tabs are in the Fork Retainer Holes
(C).
5. Attach the front wheel with the Axle
Nuts (6).
6. Tighten Axle Nuts to 21 ft-lbs.
g 02
B
C
A
A
g 03
4
3
5
C
6
NOTE: Ensure wheel spins freely without contacting fork or fender.
WARNING: Put the wheel in the center of the fork and tighten
both nuts to the recommended torque of 21 ft.-lbs.
WARNING: Failure to obey these steps can allow the front wheel to loosen
while riding. This can cause injury to the rider or to others.
WARNING: Do not use
Nuts (6) without serrations to
attach the front wheel.
Assembly