Owners manual

Put the “high” adjusting screw (E) in the correct position as follows:

• Shift the chain onto the largest front sprocket and the smallest rear sprocket.

• Turn the “high” adjusting screw (E) so the right inside edge of the chain cage and

the chain just do not touch.

NOTE: If the shift lever does not move easily:

• If the shift cable seems to stick, lubricate it.

• Do not lubricate the shift control.

• If the shift cable is sharply bent, rusted or has broken strands, replace it.

Perform the “Rear Derailleur Adjustments” if:

• The chain will not shift onto all the rear sprockets.

• The chain comes off the rear sprockets.

• The chain makes noise while on the smallest or largest rear sprocket.

• The rear derailleur rubs the spoke protector.

Front Derailleur Adjustments

Maintenance