Instructions / Assembly

12
Assembly
Handlebar Installation - various Stem Clamps
ONE BOLT STEM:
1. If necessary, loosen the Handlebar Clamp
Bolt(s)
A
and rotate Handlebar
B
into a
comfortable riding position.
2. Tighten Handlebar Clamp Bolts(s)
A
securely.
See Torque Table for recommended torque.
A
B
TWO BOLT STEM:
1. If necessary, loosen the Handlebar Clamp
Bolt(s)
A
and rotate Handlebar
B
into a
comfortable riding position.
2. Tighten Handlebar Clamp Bolts(s)
A
securely.
See Torque Table for recommended torque.
A
B
FOUR BOLT STEM:
1. If necessary, loosen the Handlebar Clamp
Bolt(s)
A
and rotate Handlebar
B
into a
comfortable riding position.
2. Tighten Handlebar Clamp Bolts(s)
A
securely.
NOTE: On four bolt stems, tighten Bolts
A
evenly in a cross-pattern as shown. Do not over
tighten. See Torque Table for recommended
torque.
3 1
2 4
BA
WARNING: If the handlebar clamp in not tight enough, the handlebar can slip in the
stem. This can cause damage to the handlebar or stem, and can cause loss of control.