Instructions / Assembly

13
Assembly
Installing the Front Wheel
Loosen the Front Brakes:
1. Squeeze the two Brake arms
together
A
.
2. Lift out the Brake Cable Guide
B
from the Guide Bracket
C
.
Install the Front Wheel:
3. Set the Front Wheel into the front
fork with Brakes pointing forward.
4. Install wheel retainers
D
making
sure the tabs are in the Fork
Retainer Holes
E
.
5. Attach the front wheel with the
Axle Nuts
F
. - See Torque
Table for recommended
torque.
NOTE: For Quick Release Axle, see
next section.
WARNING: Do not use Nuts
F
without serrations to attach the front
wheel.
NOTE: Ensure wheel spins freely without
contacting fork or fender.
WARNING: Failure to obey these
steps can allow the front wheel to loosen
while riding. This can cause injury to the
rider or to others.
REATTACH FRONT BRAKE CABLE:
1. Squeeze the two Brake arms
together
A
.
2. Insert the Brake Cable Guide
B
into
the cutout in the Guide Bracket
C
.
3. Make sure the Brake Cable Guide
B
is seated securely in the Guide
Bracket
C
cutout.
WARNING:
Check Front Brake Adjustment Before
Riding! See Brakes Section
C
A
A
B
B
C
C
A
A
B
F
D
E