Instructions / Assembly

14
Assembly
WARNING:
• Check QR axle and secure before every ride.
• If you hear any unusual noise from the wheels when riding - check the QR axle system.
• Do not ride with improperly adjusted or worn QR axle, this can result in serious injury.
• If you have any problems with the QR axle system, contact the bicycle manufacturer or a
local bicycle shop.
• This product is not intended for use in stunt riding, ramp jumping, acrobatics, or similar
activities.
• Understand all operating procedures before riding.
• Replace worn or broken parts immediately.
If you have any di culties adjusting or maintaining the QR Axle system, refer to a local
bicycle repair shop. The bicycle technicians are trained to work on QR Axle systems and
components.
• Move the QR Lever
A
to the OPEN posi-
tion and loosen QR Nut
B
(turn coun-
ter-clock-wise) enough so the wheel axle
 ts into the Fork Dropouts
C
.
• Ensure the serrated Washers
D
sit in-
side Fork Recess
E
on both sides.
STEP 1: STEP 2:
B
A
E
D
C
A
B
C
Quick Release Axle Guide (various models)
• Pushing down on fork to ensure wheel
axle is fully seated in Fork Dropouts,
tighten QR Nut
B
(turn clock-wise) hand
tight.
• Position QR Lever pointing UP or BACK
and partially close.
• Adjust QR Nut and push QR Lever
A
closed with palm of hand.