Instructions / Assembly

30
Shift System
Rear Derailleur Adjustments
The rear derailleur has two adjusting screws. The “low” adjusting screw, sometimes marked
L
, limits how far the rear derailleur and chain can move toward the wheel. The “high” ad-
justing screw, sometimes marked
H
, limits how far the rear derailleur and chain can move
away from the wheel.
1
2
3
1
2
3
4
5
6
B
A
g 05
Put the “high” adjusting screw in the correct position as follows:
• Shift the chain onto the smallest rear sprocket. Loosen Nut
C
of the cable clamp.
• Turn the lever Barrel Adjuster
A
and rear Derailleur Adjustor
B
all the way IN ( g 5 ).
• Turn the “high” adjusting Screw
G
so the Jockey Roller
D
is in line with the outside
edge of the smallest rear Sprocket
E
( g 6 )
• Remove the slack from the cable wire and tighten the Nut of the cable clamp.
D
E
F
C
G
H
g 6
continued >>