Instructions / Assembly

31
Shift System
Rear Derailleur Adjustments - continued
g 7
A
B
1
2
3
4
5
6
Put the “low” adjusting Screw in the correct position as follows:
• Shift the chain onto the largest rear Sprocket
F
.
• Loosen Nut of the cable clamp.
• Turn the “low” adjusting Screw
H
so the Jockey Roller is exactly below the largest
rear sprocket.
• Tighten the Nut of the cable clamp.
Adjust the Index Shift System:
• Shift the chain onto the smallest rear
sprocket.
• Without turning the crank, turn the Right
Shift Control
A
one “click” rearward.
• Slowly turn the crank forward.
• The chain should move from the small-
est rear sprocket to the next larger rear
sprocket.
• Turn the Adjusting Barrel
B
OUT as
needed so the chain moves exactly on to
the second rear sprocket and does not
rub, jump, or delay.
When adjusted properly, the shift system will
operate smoothly with no chain rubbing.
Note: If you have trouble, take the bike to a
bike shop.