Instructions / Assembly

33
Shift System
Front Derailleur Adjustments - continued
Put the “high” adjusting screw
H
in the correct position as follows:
• Shift the chain onto the largest front sprocket and the smallest rear sprocket.
• Turn the “high” adjusting screw
H
so the right inside edge of the chain cage and the
chain just do not touch.
NOTE: If the shift lever does not move easily:
• If the shift cable seems to stick, lubricate it.
• Do not lubricate the shift control.
• If the shift cable is sharply bent, rusted or has broken strands, replace it.
Perform the “Rear Derailleur Adjustments” if:
• The chain will not shift onto all the rear sprockets.
• The chain comes o the rear sprockets.
• The chain makes noise while on the smallest or largest rear sprocket.
• The rear derailleur rubs the spoke protector.